How to apply DIAMOND CLEAR VOX?
How to apply DIAMOND CLEAR VOX?
Application: Apply DIAMOND CLEAR VOX in an even, continuous film by sprayer, short-napped roller or brush. Use an applicator pad or roller to pick up puddles or excess material from the surface. For a more uniform appearance, especially over decorative concrete, it is recommended to backroll the product after spraying.
What is Diamond Clear?
DIAMOND CLEAR is an acrylic co-polymer curing and sealing compound designed to provide a quality cure and seal while assuring total resistance to yellowing from ultraviolet exposure.
How do you remove Super Diamond Clear?
Dried, cured SUPER DIAMOND CLEAR may be removed with a strong solvent such as EUCO SOLVENT, xylene/ xylol, or MEK (always follow package directions and warning labels). EUCO CLEAN & STRIP is a citrus-based stripper that can also be used to remove this product.
How do you use Diamond Clear 350?
Application: Apply at the recommended coverage rate using an industrial, solvent-resistant pump-up sprayer with a high-solids nozzle and a short-nap, solvent-resistant roller. Apply sealer uniformly to the concrete using sprayer, then lightly backroll the sealer to ensure even coverage.
Do real diamonds shine in the dark?
Diamonds are Cut in such a way to maximize light, draw it in, and reflect it out so it sparkles like a billion stars in the sky. So the answer to the question is “No, Diamonds do NOT Sparkle in the dark! “ They need light (which is why Jewelry Stores have tons of it) and they need a Good Cut to really bring it out.
Should a diamond be white or clear?
In general, the highest quality diamonds are totally colorless, whereas lower quality diamonds can often have a slight yellow tint. Diamond color is measured using Gemological Institute of America, or GIA color scale which goes from D (colorless) all the way to Z (light yellow or brown in color).
How long does Super Diamond clear last?
– The Diamond Clear did fairly well with fading after 2 years and was on par with other solvent-based sealers containing similar amounts of acrylic.
How long does Diamond Clear take dry?
Recoating can be done once first or consecutive coat is dry-to-touch. For best results, always apply coats consecutively within 24 hours of each coat curing. Average recoat cure times are 1-2 hours depending on humidity levels. Full cure is usually achieved within 48 hours.
Is it better to spray or roll concrete sealer?
For large scale applications sprayers are faster and more efficient; whereas paint rollers are less expensive and are more readily available. If you are going to be applying a decorative acrylic sealer or an epoxy floor coating it is best to use a 1/4″ or 3/8 nap roller.
Do Lab created diamonds get cloudy?
A lab diamond sold by Ada Diamonds will never get cloudy, fade in brilliance, or change color. Our lab diamonds have the same physical properties of a mined diamond. It will not change appearance. It will look exactly the same in a billion years as it does the day you receive it from Ada Diamonds.