Why is my Harman Kardon subwoofer not working?
Why is my Harman Kardon subwoofer not working?
Many Harman subs have an On/Off switch independent of the signal relay. If everything is connected properly and the receiver is sending the LFE signal to the sub, you may need service. If there is no light at all, you may have a blown internal fuse or other nonuser-serviceable issue related to the amplifier.
How do you fix a subwoofer that stopped working?
Try four troubleshooting steps to fix a faulty subwoofer
- Check connections and speaker wires.
- Check outlets, power cable, and fuse.
- Check system and menu settings.
- Verify connections, turn on the subwoofer, and set the volume.
Does a subwoofer have a fuse?
Fuses for subwoofers can be located in-line with the subwoofer wires, within the speaker enclosure, and if there is an amp dedicated to the subwoofer, the fuse could be located there. In-line fuses can have different looks. You would either unscrew it or pull it apart to access the fuse.
What to do if there is no sound from the subwoofer?
Turn on the subwoofer. Ensure the subwoofer has not been muted. Increase the volume level on the subwoofer. Ensure the speaker settings on the stereo system or TV have been configured properly to use the subwoofer. IMPORTANT: Certain speaker settings may disable the subwoofer. Trying a different speaker setting may resolve the issue.
Why is my subwoofer not working on my TV?
NOTE: If a pattern that ends in .0 is selected, the subwoofer will not work. Verify that the subwoofer indicator light on the front panel of the A/V receiver is on. Depending on the audio source, the low frequency effect (LFE) signal may not be sent to your subwoofer.
Is there a way to put a subwoofer under the speakers?
Under the speakers, there is an option for 2 channel playback. You can set it to manual and select the frequency, large/small of your two front speakers and to include the sub or not. If LFE + Main is selected, then you are doubling the BASS.
How can I tell if my Sony subwoofer is still on?
In this case, set the sound field setting to A.F.D. AUTO or a another sound field. Sony® receivers will send a simulated LFE signal to the subwoofer and the SW indicator will light up. Verify the subwoofer power cord is plugged into an active AC outlet and that the subwoofer is powered on.