What is UTP balun?
What is UTP balun?
CCTV video baluns, also known as UTP baluns, allow the security camera installer to minimize cost of wiring for surveillance camera installations by using network cabling such as category 6 or CAT5e cable instead of Siamese Coax Cable. For video transmission less than 1000ft, passive balun are be used on both ends.
Why video balun is used?
A video balun is a device used to adapt the type of connection to allow the use of UTP (Unshielded Twisted Pair) cable to transmit the signals from an analog camera. The balun word originated from the terms balanced/unbalanced because it can convert an unbalanced signal to balanced.
Can I use UTP cable for CCTV?
For the installation, you can either choose to use the conventional coaxial cable (RG59) or the Cat5 (Unshielded twisted pair). With Passive Video Baluns based on specification you should utilize UTP cable to transmit color video as far as 1300ft. With a active CCTV Balun you can go as far as 5000ft.
What is a UTP camera?
Sep 13th, 2010. Samsung Techwin America’s UTP Camera Series delivers high-quality video for distances up to 3,000 feet over unshielded twisted pair (UTP) structured cable. The UTP Dome and Box Cameras feature easy installation and management, and are compatible with UTP hubs from leading suppliers.
What is a balun used for?
This transformer is known as a balun, and they are in operation in anything from telephone lines to transmitters. Baluns are used both to sort out the flow of AC signals and make the necessary impedance transformation between coaxial cable, which has a low impedance, and balanced loads, which have higher impedances.
What does a balun do in CCTV?
First of all what is a Balun? Without going into too much technical detail a balun will allow you to change the signal from a CCTV camera that uses a coax cable to use a Cat5e cable instead.
What is balun used for?
What does a BNC balun do?
A Video Balun enables the transmission of video using unshielded twisted pair wire instead of coaxial cable. The word “balun” comes from combining the terms balanced and unbalanced. The function of a balun is to transform an unbalanced signal into a balanced signal.
Who is the owner of UTP video balun?
UTP Balun has officially been acquired by AAS Technology. UTP logo is a generic product name and is not a logo or trademark. This web site is for OEM or ODM only.
How does a UTP balun work on CAT5 cable?
A UTP balun, aka video balun, converts a 75-ohm video signal to 100-ohm impedance for Cat5 cable. On the other end, the receiving balun then converts the signal back to 75 ohms.
What do UTP baluns do for CCTV cameras?
Video Baluns | UTP Balun. CCTV video baluns, also known as UTP baluns, allow traditional coax cable to be replaced by category 5 and other forms of twisted pair wire in CCTV video camera & surveillance installations. Video baluns allow installers to use more cost-effective structured cabling techniques to wire security cameras.
How are active balun transceivers used for video?
Active balun transceivers enable UTP wires for cameras to be run distances up to 5,000 feet. If you are new to the idea of using baluns for video, check out our video balun installation videos.