Helpful tips

What is the difference between E6010 and e7018?

What is the difference between E6010 and e7018?

E6010 is used for deep penetration welding, while E 7018 is used for welding metal that tends to crack, producing quality welds with excellent toughness and high ductility. E 6010 is used for welding the joint root-pass for proper penetration, and E 7018 is used for the hot-pass, fill-up, and cap beads.

What does E6010 mean in welding?

The prefix “E” designates an arc welding electrode. The first two digits of a 4-digit number and the first three digits of 5-digit number indicate minimum tensile strength. For example, E6010 is a 60,000 psi tensile strength electrode while E10018 designates a 100,000 psi tensile strength electrode. E.

What is unique about the 6010 electrode?

The welder has good elongation and good strength characteristics. Another feature of the 6010 electrodes is the speed at which it burns. This makes it ideal for welding at a stiffening angle or downhill passes. The 6010 electrode has ample strength to do the job and is faster than other electrodes in its category.

What are 2 different types of electrode sizes?

Common electrodes used in Stick welding are 6010, 6011, 6013, 7018 and 7024 with the most common diameters ranging from 1/8- to 5/32-in.

What type of electrode is E6010?

cellulosic mild steel electrode
DESCRIPTION: Pinnacle Alloys E6010 is a quick-starting, cellulosic mild steel electrode with outstanding arc stability, penetration, and wash-in. It is ideal for welding in all positions and produces an X-ray quality weld with light slag that’s easy to remove.

What is the minimum tensile strength of an E6010 electrode?

62,000 psi
2.1 Classifications E6010, E6011 and E6027 weld metals are required to have more than 62,000 psi tensile strength, 50,000 psi yield strength, 22% elongation in two inch gauge, and 20 ft-lb at -20°F Charpy V-notch impact.

What does E6013 stand for?

E6013 = High titania potassium flux. AC, DCEP, or DCEN for flat, vertical, overhead, and horizontal positions. E7018 = low-hydrogen potassium, iron powder flux.

What amps should 7018 welding rods be at?

In turn, the rod diameter you use depends on the thickness of the steel you are welding. In general, the 7018 rod is used with currents up to 225 amps . A rule of thumb is to use 30 amps of current per 1/32 inch of rod diameter. That would mean using 90 amps of current on a rod that is 3/32-inch in diameter.

What is 6010 welding rod?

6010 arc welding rods are used in the pipelines and fills in the pipes. It can be used to weld on direct current only and not on AC. It provides excellent control of arc. This rod gives deep penetration and works well in all positions.

What is 6011 welding rod used for?

6011 arc welding rods are specially designed to be used in the AC and the direct current electrode. It requires more manipulation than others. It is used in the industry and construction of steam pipe lines.

What are the sizes of welding rods?

These rods come in a range of sizes to suit the needs of different projects and welding techniques. The smallest rods measure 1/16-inch (1.6 mm) in diameter, while the largest are generally no greater than 5/16-inch (7.9 mm) in diameter. Thicker rods require higher electrical amps, which are generated by the welding machine.