What frequency does TETRA use?

What frequency does TETRA use?

390 to 400 MHz
TETRA base stations usually transmit in the frequency band 390 to 400 MHz just below the UHF TV band.

Can you listen to Tetra radio?

TETRA is a trunked radio communications system that stands for “Terrestrial Trunked Radio”. Recently, a software program called Tetra Live Monitor (telive) was released on GitHub. This software can be used along with the (patched) Osmo-TETRA software to monitor and listen to unencrypted TETRA communications.

What is TETRA signal?

Terrestrial Trunked Radio (TETRA) is a worldwide common mobile communication standard, used by authorities and organizations with security tasks. Previous studies reported on health effects of TETRA, with focus on the specific pulse frequency of 17.64 Hz, which affects calcium efflux in neuronal cells.

What frequency are police radios on?

The 5.9 GHz band, known as the Dedicated Short Range Communications Service (DSRCS), is intended to promote automobile safety….Public Safety Spectrum.

Frequency MHz Available for Public Safety
25-50 MHz (VHF Low Band) 6.3 MHz
150-174 MHz (VHF High Band) 3.6 MHz [non-contiguous]
220-222 (220 MHz band) 0.1 MHz

What are DMR frequencies?

DMR covers the RF range 30 MHz to 1 GHz. There are DMR implementations, (as of early 2016), that operate as low as 66 MHz (within the European Union, in ‘Lo-Band VHF’ 66–88 MHz.) The DMR Association and manufacturers often claim that DMR has superior coverage performance to analogue FM.

How does a TETRA system work?

TETRA uses time-division multiple access (TDMA) with four user channels on one radio carrier and 25 kHz spacing between carriers. Both point-to-point and point-to-multipoint transfer can be used. In addition to voice and dispatch services, the TETRA system supports several types of data communication.

What are the radio frequencies for TETRA air?

– notes, details and overview of the TETRA radio frequencies and the TETRA air interface.. TETRA Radio Includes: For emergency services in Europe the frequency bands 380-383 MHz and 390-393 MHz have been allocated. These bands can be expanded to cover all or part of the spectrum from 383-395 MHz and 393-395 MHz should this be needed.

What is the bandwidth of Tetra trunk radio?

TETRA user can be assigned one time slot or 4 time slots as transmission bandwidth. These 4 channels can be modulated over one RF carrier frequency. All the carriers are of 25KHz Bandwidth. As the major application of TETRA trunk radio system is public safety as well as emergency services; call set up time should be less.

What kind of bitrate is Tetra walkie talkie?

TETRA is a professional mobile radio and two-way transceiver (walkie-talkie) specification. Formerly known as Trans-European Trunked Radio. Used extensively in Europe, especially Great Britain and Germany. Modulated with π/4 DQPSK. Runs on 18000 baud with 36000 bps maximum user bitrate.

What kind of Technology is used in Tetra?

TETRA uses TDMA (Time Division Multiple Access) technology with four user channels interleaved into one carrier with 25 kHz carrier spacing. This means excellent efficiency of frequency spectrum. Cost savings are also achieved in base stations were only one radio unit is needed for every four user channels.