Guidelines

How many voices in JU-06?

How many voices in JU-06?

The JU-06 features a chain mode that allows you to connect two JU-06 modules using the MIDI ports and create one, 8-voice synthesizer. Adding additional modules adds another 4 voices of polyphony with each module. This is especially great when controlling the JU-08 from a larger external keyboard.

Is the JU-06 analog?

As such, it was little surprise that Roland chose to revive the 106 as part of its Boutique range, coming up with the JU-06, which emulated the analogue sound of the original using Roland’s Analogue Circuit Behaviour technology, a proprietary form of digital synthesis.

Is ju06a polyphonic?

The ‘6’ in Juno ‘6’, ’60’ and ‘106’ was representative of each synth’s six-voice polyphony, so the fact that the JU-06A remains a four-voice instrument will infuriate not only Roland purists but also those who like to play pads which are richer than four voices deep.

Is the Ju 06a worth it?

The JU-06a is intuitive to use and has a beautifully authentic Juno sound. It’s not hard to get gorgeous sounds from this synth, from lush chords to punchy bass lines. Upgraded from the ju-06, the Arpeggiator is a welcome addition to this unit and the 16 step sequencer is great fun to use as well now.

How do you change the MIDI channel on a Ju-06?

While holding down the [MANUAL] button, press the [2] Bank button. * Keep holding down the [MANUAL] button until the selection is made. The Button that is Flashing is the current Midi channel. To change the Midi channel select the button that corresponds to the midi channel desired.

How do you test a Juno-106?

#ENTERING TEST MODE & INITIAL SETTINGS -Hold KEY TRANSPOSE, turn on your JUNO-106 and release KEY TRANSPOSE. *The display should now show ‘-_’. This means that your JUNO-106 is now in ‘test mode’.

How do you calibrate a Juno-106?

Power on the Juno-106 while holding down the KEY TRANSPOSE button; this will put the keyboard in Test Mode. The display will read ‘-_’. Press the Poly 1 and Poly 2 buttons together, and now for each note played, the display will show which voice is sounding (‘-1’ through ‘-6’). (Click on any photo to enlarge it.)

Is ju06a analog?

The JU-06 that launched this whole oddly-named Roland Boutique phenomenon almost got this right, but then mostly screwed it up. There’s a step sequencer, but no external clock in. (There’s MIDI clock in, just not analog clock in.)

Is Roland boutique An analogue?

The JP-08 Roland Boutique module is based on the JUPITER-8 synthesizer. With its massive analog sound, the JUPITER-8 is one of the most revered Roland synths of all time.

How do you power a Ju 06A?

You can play the JU-06A by connecting a MIDI device via a commercially available MIDI cable. This turns the power on/off. * Before turning the unit on/off, always be sure to turn the volume down. Even with the volume turned down, you might hear some sound when switching the unit on/off.

How do I change the MIDI channel on a ju06a?

What kind of sounds can a Juno 106 make?

The Juno-106 is a programmable, six-voice polyphonic, analog, subtractive synthesizer. With its relatively simple voice architecture, it is able to produce luscious soundscapes, rich basslines, strings, pads, pianos, leads and percussive sounds.

How many voices are in a Roland ju-06?

The original JUNO-106 was famous for big lush sounds created by its 6 oscillators/voices. The JU-06 features a chain mode that allows you to connect two JU-06 modules using the MIDI ports and create one, 8-voice synthesizer. Adding additional modules adds another 4 voices of polyphony with each module.

What are the assign modes on the Juno-106?

The Juno-106 offers two Assign modes – Poly 1 and Poly 2. Poly 1 turns the Juno-106 into a six-voice polyphonic synthesizer, assigning one synth voice to each key that is pressed. This particular setting is generally suited to sounds with envelopes similar to a piano or a guitar and is recommended for standard use.

What does poly 1 and 2 do on Juno 106?

Pressing Poly 1 and 2 moves the Juno-106 into Solo Unison mode. In this mode, the Juno-106 acts as a monophonic synthesizer, with all six voices assigned to each key that is pressed.