How does the I-stat work?
How does the I-stat work?
The i‑STAT is a handheld, in vitro analyser designed to be used at the patient’s bedside (point‑of‑care) for testing arterial, venous or capillary whole blood. i‑STAT cartridges – single‑use, disposable cartridges for whole‑blood testing. They are inserted into the analyser after the blood sample has been applied.
How long do Istat cartridges last?
14 days
Cartridges may be stored at room temperature (18 to 30°C or 64 to 86°F) for 14 days. Cartridges should not be returned to the refrigerator once they have been at room temperature, and should not be exposed to temperatures above 30°C (86°F).
How do you do stat?
perform patient-side testing in 4 easy steps:
- Apply a few drops of blood into a cartridge.
- Insert cartridge into the analyzer.
- View results within minutes.
- Transmit results to records. Test results are automatically uploaded when the i-STAT 1 analyzer is placed in the downloader or.
How does the Istat measure blood glucose?
The i-STAT System test for glucose measures glucose amount-of-substance concentration in the plasma fraction of arterial, venous, or capillary whole blood (dimension mmol L-1) for in vitro diagnostic use.
What does i-stat test for?
The i-STAT is a handheld, in vitro analyser designed to be used at the patient’s bedside (point-of-care) for testing arterial, venous or capillary whole blood. It takes single-use cartridges containing chemically sensitive biosensors on a silicon chip that are configured for test-specific indicators.
What does i-stat stand for?
ISTAT
| Acronym | Definition |
|---|---|
| ISTAT | International Society of Transport Aircraft Trading |
| ISTAT | Integrating Science Teaching and Technology (University of California, Berkeley) |
| ISTAT | Independent Supporters Trust of Athlone Town (Footboll Club, Ireland) |
Is Istat waived?
The i-STAT CHEM8+ cartridge contains nine measured assays (sodium, potassium, chloride, blood urea nitrogen (BUN), ionized calcium, TCO2, glucose, creatinine and hematocrit) and is categorized as a CLIA waived test for venous whole blood samples, meaning this cartridge could be used in a facility with a CLIA …
What tests can an iSTAT run?
Test-specific, single-use i-STAT cartridges are available for a range of clinical tests, including cardiac markers, lactate, coagulation, blood gases, chemistries and electrolytes, and hematology.
How much does an I-Stat cost?
ABBOTT LABS I-STAT 1 is one of the 25 best-selling Analyzers electrolytes and blood gas. The Current Price Range Based on 9 Vendors on Bimedis. It’s Costs Starts Approximately at $1,300 and ends at the Highest Price $6,500.
What tests can an Istat run?
What does the i-stat test for?
Where can I find the i-STAT user manual?
Printed in USA. i-STAT is a registered trademark of the Art: 726064-00J Rev. Date: 13-Feb-17 Abbott Group of Companies in various jurisdictions. Page 2: System Components Appendix 1: i-STAT 1 Wireless Analyzer Labels System Components Note: Pictured below are the three different labels that the i-STAT 1 Wireless Analyzer may have.
What are the components of the I-Stat System?
The I‑STAT System incorporates comprehensive components needed to perform blood analysis at the point of care. The System consists of the following primary components: A. Cartridges A single‑use disposable cartridge contains a microfabricated sensor array, a calibrant solution, fluidics system, and a waste chamber.
How does the i-STAT blood analysis system work?
The i-Stat System performs point of care blood analysis using a single disposable cartridge which contains microfabricated sensors, a calibrant solution, fluidics system, and a waste chamber.
What do you need to know about Abbott i-STAT 1?
A portable handheld, a cartridge with the required tests, and 1 to 3 drops of blood will allow the caregiver to view quantitative results for tests commonly needed in physician offices, nursing homes, and clinics.