Popular articles

How do I reset my Netgear Telstra phone?

How do I reset my Netgear Telstra phone?

Use the end of the paper clip by inserting it into the pin hole of the Nighthawk M1 and hold it there for 30 seconds, then release. This should reset your Nighthawk M1 to it’s default settings.

How do I reset my 2nd Generation AirPort Express?

With the AirPort Express plugged into power, press and hold the device’s reset button for 10 seconds. A green light will flash for a bit and then the device will reset itself — a process that takes about 45 seconds. Once reset, you can configure it with the AirPort Express Assistant or the AirPort Admin Utility.

How do I reset my time machine to factory settings?

Press and hold the reset button for about 5 seconds, until you see the status light on the base station flashes amber rapidly. Then release the button. Wait about a minute for the base station to finish restarting. Open AirPort Utility, which is in the Utilities folder of your Applications folder.

How do I erase my time capsule and start over?

If you’re using an AirPort Time Capsule, you can use AirPort Utility to erase its disk.

  1. Open the AirPort Utility app on your Mac, located in the Utilities folder in the Applications folder.
  2. In the graphical overview, select the Time Capsule you want to erase, then click Edit.
  3. Click Disks, then click Erase Disk.

Why is my Nighthawk router not connecting to internet?

If you get an “Internet not connected error” in the Nighthawk or Orbi app, try power-cycling your network. Your networking hardware might need to restart to establish a connection with your Internet service provider (ISP). If you don’t know your router’s static IP, contact your ISP.

Why does my AirPort Express keep dropping out?

Wi-Fi seems magical. Unless your connection keeps dropping or slowing to a crawl. Interference can cause that. If you have an Apple AirPort Extreme, AirPort Express, or AirPort Time Capsule as your Wi-Fi router and you’re experiencing disconnections or interference one of the first fixes to try is changing the channel.