How do I reset my Cisco E900 router password?

How do I reset my Cisco E900 router password?

Help! The E900 Default Password Doesn’t Work!

  1. Plug in the router and turn on the power.
  2. Flip it over on its top so that you have access to the bottom.
  3. With a paperclip or other small and sharp object, press and hold the Reset button (it’s accessible through a tiny hole on the bottom of the router) for 5 to 10 seconds.

How do I access my Cisco Linksys E900 router?

Linksys E900 Default Router Login

  1. Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  2. Type (the default IP to access the admin interface) in the address bar of your internet browser to access the router’s web-based user interface.
  3. The default username for your Linksys E900 is admin.

How do I reset my Cisco Linksys E900?

To reset the Linksys E900 to its default settings, you have to do the following steps:

  1. Switch on router.
  2. Press Reset button and hold for at least 10 seconds.
  3. Device restarts automatically.
  4. Router has been reset to factory settings.

How do I login to my Cisco router?

Cisco router login:

  1. Make sure you’re connected to your network.
  2. Open a browser, and go to 192.168. 15.1.
  3. Enter the username and password.
  4. Default login credentials.
  5. Next Up: Speed up your Wi-Fi connection.

How configure Cisco E900 router step by step?

Linksys E900 setup without CD:

  1. Step 1: Check Internet connection through mode.
  2. Step 2: Make connections to the router.
  3. Step 3: Open the setup page.
  4. Step 4: Change Internet connection settings.
  5. Step 5: Access Internet on Main computer.
  6. Step 6: Change wireless settings.
  7. Step 6: Connect to wireless network.

What is the username and password of cisco?

When you access the device, you should be asked to enter a username and password. The default user name of your Cisco router is either “admin” or “cisco”. The default password of all Cisco routers is either “admin”, “cisco” or is a blank field.

What is the default username and password of cisco switch?

Step 1. Log in to the switch console. The default username and password is cisco. If you have configured a new username or password, enter those credentials instead.

How do you set a password on a Cisco router?

Configuring console password of a CISCO routers:

  1. Enter global configuration mode of the CISCO router.
  2. Put the command line console 0 to the router.
  3. Provide the password by using password command. For example, if you want to put password “cisco” then the command will be password cisco.
  4. At last, put the command login.

What is the default password for the Linksys E900 router?

Linksys E900 (N300) Default Password. The default password for all Linksys E900 routers is admin. This password is case sensitive, as with most passwords. Some routers don’t require a username when logging on with the default credentials, but the Linksys E900 does – it’s admin, the same as the password.

What’s the IP address of my Cisco E900 router?

In the picture above the address bar has in it. Just replace all of that with the IP address of your Cisco Linksys-E900 router. Your router’s IP address can also be refered to as your computer’s default gateway. By default the IP address is set to:

How to set up a linkys E900 router?

For the Linksys E900, you have to do the following steps for access: Put router into operation Set up a connection between the device and the router via Wi-Fi * or network cable Enter IP address in the address line and confirm with ‘Enter’ button Enter username as well as password in the login form and confirm

Where do I Find my Cisco Linksys password?

Enter your username and password, and then click the Login button to log in to your Cisco Linksys-E900 router. If your username and password do not work then please visit our Default Cisco Linksys Router Passwords page.