Popular articles

How do I program my Telus Optik remote to my TV?

How do I program my Telus Optik remote to my TV?

Synchronize the remote

  1. Turn on your television and TELUS Digital box.
  2. Press and hold TELUS/STB ; and then press OK. When both are released, the buttons will flash 2 times.
  3. Enter the code 977 on the number pad.
  4. Press TELUS/STB and then TV to link the 2 devices.
  5. Press Enter/Options.
  6. Press Power.

How do I sync my remote to my Dynex TV?

Remote Control Codes For Dynex TVs

  1. Turn on the TV.
  2. Press and hold the TV and SEL buttons simultaneously for 3 seconds.
  3. With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
  4. Verify by pressing the VOLUME + button.
  5. Press the TV button to store the 3, 4, or 5 digit code.

How do I find my Telus remote code?

Program the TV button

  1. Enter the code 29 for TV and your remote will search for a code that may work. Note: This may take up to 15 minutes. The TV or aux light will flash. Press okay and then the TV should be synced.
  2. For DVD and blue ray enter 44.
  3. For Amplifiers enter 79.

How do I reset my Dynex TV remote?

Dynex TV remote control not working? Try this!

  1. Open the battery compartment on the back of the remote control pad and remove both batteries.
  2. Press and hold any button on the remote control pad for 20 seconds.
  3. Release the button and properly reinsert the batteries.

How do you find remote code?

How to Find a Code for My Remote Control

  1. Look through the User’s Manual for your remote control to find the code section.
  2. Go to an website listing code, such as the Remote Code List (See References).
  3. Call the manufacture of your remote and ask whether it can tell you the codes you need.

How do I connect my one for all remote to my TV?

Step 1: First, press down the MAGIC key on your remote. Step 2: Next, select the device you want to control. Step 3: Finally, hold down the digit on the remote for your brand & device (e.g. 6 for Samsung TV). As soon as the device turns off, release the key and the LED on the remote will blink twice.