How do I get rid of CPU fan error?
How do I get rid of CPU fan error?
How to Fix a CPU Fan Error
- Move your computer.
- Stop overclocking.
- Clean the air vents.
- Clean the CPU fans.
- Check your CPU fan.
- Check your CPU fan’s location.
- Try an alternate CPU fan header.
- Check the CPU fan’s settings in BIOS.
Why does my BIOS say CPU fan error?
When you see the error message “CPU FAN Error” in POST, it means the system doesn’t detect the FAN. If you install another brand of CPU FAN with lower revolutions speed, the system may not be able to correctly detect it. You can try to set “CPU Fan Speed Low Limit” to 200 RPM in BIOS configuration.
Where do you connect H100i fans?
The H100i has an integrated 4-fan hub which is where you will want to plug in your H100i fans. You will find two ports on top of the cooling unit, where you can plug in the included fan power adapter cables.
How do I set up my H100i fan?
Let’s get started!
- Step 1: Mount the Backplate. First, adjust the notches on the backplate inward for LGA115X compatibility.
- Step 2: Attach Fans to Radiator.
- Step 3: Attach Radiator to Case.
- Step 4: Mount the Cooling Block.
- Step 5: Connect Fan and Pump Power Cables.
- Step 6: Connect Corsair Link Data Cable.
Where do AIO fans plug into?
When an AIO cooler has separate power leads for pump and fan(s), rule of the thumb is to connect pump lead to pump_header or AIO_pump header while radiator fans should go to CPU_Fan header. Idea is to have radiator fans speed be regulated by CPU temperature, SYS_Fans are regulated by some other part’s temps.
Where does the CPU water cooler plug into?
The radiator fans should always be connected to CPU Fan 1 and CPU Fan 2 (or CPU Fan OPT) on the Motherboard. Single Radiator Fan: Connect the fan to CPU Fan 1.
How to install the hydro series h100i CPU cooler?
This article will guide you on installing the Hydro Series H100i, if you are using a different model, please click the corresponding link below: The Hydro Series™ H100i is a high performance all in one liquid CPU cooler from Corsair.
Where do you plug in a corsair h100i CPU cooler?
Now that the unit is mounted, we will want to plug in power cables for both of the fans and the pump. The H100i has an integrated 4-fan hub which is where you will want to plug in your H100i fans. You will find two ports on top of the cooling unit, where you can plug in the included fan power adapter cables.
What kind of motherboard does the hydro h100i use?
In this installation we will be attaching the H100i to an Asus P9X79 motherboard which uses the LGA 2011 socket. The H100i ships with two different mounting brackets one for Intel sockets, and one for AMD.
How is the backplate for the hydro h100i installed?
The backplate for the H100i is adjustable and can be configured for any of the supported socket types. Just slide the pins on the bracket so that they align with the holes on the motherboard and then use the double-sided mounting bolts to secure it into place.