Popular articles

What is the purpose of leaf spring clamps?

What is the purpose of leaf spring clamps?

Their main purpose is to help keep the main leaf from breaking on a rebound. When the weight of a vehicle or trailer is on the spring, all of the leaves work together to support the spring above them. If the wheel drops for any reason the total weight of the axle falls on the main leaf if there are no rebound clips.

Should I grease my leaf springs?

Modern leaf springs do not need lubricating with oil — which may damage any anti-friction material between leaves. Spray them instead with a silicone-based lubricant. With most modern cars, leaf springs are found mainly in the rear suspension.

How do I make my leaf springs ride smoother?

The following steps can make a huge difference:

  1. Reduce the unsprung mass.
  2. Soften the suspension system.
  3. Change the wheels and tires.
  4. Modify the chassis.
  5. Eliminate the vibrations.
  6. Get new leaf springs.

Do leaf springs need clamps?

They are must for hard wheeling on leaf springs. Why? Because if you have more than 2 leafs, they will fan out & then hyper-extend the main leaf. Bump stops that keep the springs from hyper-extending too much will also save/prolong spring life.

How do you keep leaf springs from shifting?

Proper way to do it would be to take off the leafs, pull them apart, grind down any ridges made by friction, paint them, slip plate them, and put them back in with new bushings. Make sure your spring clamps are tight enough on the sides, but not so much that they wear into the spring (or viceversa).

Are Wider leaf springs better?

With heavy-duty leaf springs, you’ll be able to carry more weight and see less wear on your leaf springs, because they’re designed to handle the larger load without deforming to the point that their structure becomes compromised.

Can you use leaf springs on a Dodge van?

ATS Springs is here to offer completely assembled leaf springs for your Dodge truck, Dodge van and late model muscle cars. Here at ATS we offer direct replacement leaf springs along with heavy-duty and custom options to make sure you are getting the exact suspension setup you want!

What are leaf spring wear pads for truck suspensions?

What are Leaf Spring Wear pads? Many suspensions are designed with slipper type springs or contact overload springs. These springs will contact fixed points in the suspension as part of their design and the weight that the springs are supporting will be transferred through these fixed points to the springs.

Is there a replacement for a leaf spring?

Direct replacement – this leaf spring insulator is designed to match the fit and function of the original insulator on specified vehicles Restores functionality – reliable replacement for an original part that has failed due to fatigue

Why do you need a leaf spring insert?

Leaf Spring Tip Inserts were designed to keep steel off steel at the end of each leaf spring. in the road, the leaves in the spring pack slide back and forth. The Tip Inserts keep the friction quiet and reduce wear on the leaf springs.