What is the minimum height for a standpipe for a washing machine drain?
What is the minimum height for a standpipe for a washing machine drain?
30″
Top of standpipe must be at least 30″ (762 mm) high; install no higher than 55″ (1.4 m) from bottom of washer. If you have an overhead sewer and need to pump higher than 96 inches, a sump pump and associated hardware are needed. See “Alternate Parts”. Minimum capacity: 20 gal.
How much does it cost to install a washer box?
The price to put in washer and dryer hookups averages between $350 and $600 if they’re placed in an ideal location. If the appliances end up in a spot that’s further from your existing plumbing, you could end up paying anywhere from $700 to $2,000 or more.
Are all washing machine drain hoses the same size?
The drain hose is available in different lengths, and universal sizes are 1 to 1¼ inches in diameter. The length of the drain hose depends on how far the washer is from the stand pipe or laundry sink.
What is a washing machine standpipe height?
Most washing machines require a standpipe with a height of at least 36 inches. Either way, the standpipe height should fall between 30 and 48 inches from the floor. Laundry standpipes must be tall enough to extend past the washing machine’s overflow line—typically 30-36” in height, or 18”-30” above the trap.
Should a washing machine be on a GFCI?
The NEC doesn’t require GFCI protection for clothes washing machines specifically, but it does for “Laundry Areas.” If the answer is “yes”, then you have your answer- the clothes washing machine will be GFCI protected, because all 120-Volt receptacles are to be GFCI protected in laundry areas, per the 2017 NEC.
How do you install a washer hookup?
With these three items, as well as the washing machine itself, the installation process can get underway.
- Prepare the Area.
- Read the Instruction.
- Clean the Faucets.
- Move the Machine into Place.
- Connect the Water Supply Hoses to Their Respective Faucets.
- Connect the Water Supply Hoses to the Back of the Washer.
- Check for Leaks.
How tall does a washing machine box have to be?
inches (457 mm) above the floor. The box has to be higher than the water level inside the machine, but front loads do NOT fill the drum, they just have a small amount of water in the bottom, so the standard height is okay. Thanks for the replies, that makes more sense, everything you reads states from washer top.
Where are the valves on a washing machine?
In this case, trying to combine those two functions into a single box would make the wanted result harder. Instead locate the valves where they are accessible, and pipe the output of the valves to the garden hose hose faucet fittings that are located where best for the washing machine.
How tall should the faucet be behind a washer?
While the faucet heights may vary, the water supply is generally installed directly behind the washer. If you’re installing new water supply lines and a drain, placing it behind the washer at a height of 30 to 34 inches allows you to easily reach over and behind the washer to turn the faucets on and off.
How tall should a washer drain hookup be?
While the heights of the hookups may vary according to your local building codes, consider convenience when having the new faucets and outlets installed. Washer drain hookups should be between 30 and 55 inches from the bottom of the washer. The same measurements apply if the washer drains into a laundry tub.