What is standard rough-in size for toilet?
The standard rough-in is 12 inches, though you may encounter 10-inch and 14-inch rough-ins in older homes. You should find the rough-in measurement in the new toilet’s product information.
How far from the wall should a toilet rough-in Be?
The general rule of thumb for clearance from the wall that faces the bowl is 24″ and just about 15″ on each side. The rough-in measurement indicates how much clearance you have and will allow you to select a compatible toilet.
Can you replace a 14-inch rough-in toilet with a 12-inch rough-in toilet?
Replace a 14-inch rough-in toilet with a 12-inch rough-in toilet. You can definitely replace a toilet with a rough-in of 14 inches with one with a rough of 12 inches. The problem with this method is that a 2-inch gap will be left between the toilet tank and the wall.
Can you replace a 10-inch rough-in toilet with a 12-inch?
The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.
Can you replace a 10 inch rough-in toilet with a 12 inch rough-in toilet?
Why are 14 inch rough-in toilets so expensive?
MANY years ago, the 14″ toilets used the same tank as the 12″ ones and the bowls were made with the opening 2″ further from the back and they DID take up less legroom in the bathroom, but they decided it was cheaper to make different tanks than bowls.
What is the minimum size for a toilet room?
Toilet Compartment Recommendations The size for a separate toilet compartment should be at least 36×66 inches with a swing-out or pocket door. Code Requirement: The minimum size for a separate toilet compartment is 30×60 inches.
Does Kohler make a 10 inch rough-in toilet?
KOHLERHighline Classic Comfort Height 10 in. Rough-In 2-Piece 1.28 GPF Single Flush Elongated Toilet in White.
What does rough-in mean when buying a toilet?
A toilet’s rough-in refers to the measurement dimension from the finished wall to the center of mounting holes on the floor flange. Toilets are typically offered in either 10 inch, 12 inch, or 14 inch rough-ins. The 12 inch rough-in is by far the most common in the US.
How do you measure toilet rough in?
Measure toilet rough in with existing toilet. On either side of your toilet, you’ll see two bolts (usually with caps on them). Measure from the center of those caps or bolts to the wall and that measurement is your “rough in”.
What does 10 inch Rough in toilet mean?
Measuring a 10-inch rough-in toilet is quite simple. Take some measuring tape and see how much you have from the wall to the main drain pipe. A 10-inch rough-in means that the toilet’s main drain is 10 inches away from your bathroom’s wall.
What is rough in toilet measurement?
The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″.
What are the standard dimensions of a toilet?
Most toilets are about 26” tall with a seat height of anywhere from 14 to 16 inches. Standard Tank Width: 18.75 inches Standard Toilet Depth: 27.5 inches Standard Toilet Height: 26 inches Standard Toilet Seat Height: 14-16 inches