What is R2 zoning in Ottawa?

What is R2 zoning in Ottawa?

R2 means this is the Primary Zone (in this case Residential, 2nd density). It is a land use category with specific permitted uses and regulations. A suffix adds a single regulation to a zone (in this example “H” is a maximum height limit in metres, and in other instances “F” is the maximum floor space index permitted.

What are the zoning codes in Ontario?

Property code series

  • 100 series: Vacant land.
  • 200 series: Farm.
  • 300 series: Residential (340, 341, 352, 361 and 374 – Multi-Residential)
  • 400 series: Commercial.
  • 500 series: Industrial.
  • 600 series: Institutional.
  • 700 series: Special & exempt.
  • 800 series: Government.

What is R3 zoning in Ottawa?

Purpose of the Zone 2) The purpose of the R3 zone is to, (a) permit a range of low density dwelling types on land designated Residential Area in the Official Plan; and (b) permit this range of dwelling types on individual lots, or in planned unit developments.

How close can you build to the property line in Ottawa?

For structures larger than 108 square feet, a building permit is needed and the City will require that the structure be set four (4) feet away from property lines and fences. Alternatively , with a grading plan that the City approves, a structure can be built as close as two (2) feet from property lines and fences.

Do you need a permit to build a deck Ottawa?

Under the Building Code Act, a building permit is required for the construction of a new building, an addition, or alteration of any building or structure with a building area of over 10 square metres (approximately 108 square feet).

Where to find zoning by law in Ottawa?

The City of Ottawa Zoning By-law is made available on the web site for information, however confirmation on the zoning provisions should be sought through the City’s development information officers (DIO), by contacting 311 and asking for the DIO for the geographic area in question.

What are the different residential zones in Ottawa?

In the Urban/Suburban area the R1- Residential First Density (detached dwellings), R2- Residential Second Density (two unit dwellings), R3- Residential Third Density (townhouse dwellings), R4- Residential Fourth Density (low rise apartments), R5- Residential Fifth Density (mid/high-rise apartments) and the RM-Mobile Home zone applies to all areas.

What are the zoning rules for are 10?

[Ord. 810, 2000; Code 2000 § 11.20.11.] 18.25.020 Permitted uses. The following uses and their accessory uses are permitted outright in an R-10 zone: (A) Site-built detached single-family dwelling and detached single-family manufactured housing, subject to CMC 18.20.070.

What is the purpose of the R1 residential zone?

R1 – Residential First Density Zone (Sections 155 and 156) Purpose of the Zone The purpose of the R1- Residential First Density Zone is to: restrict the building form to detached dwellings in areas designated as General Urban Areain the Official Plan;