Helpful tips

What is a SCYE depth measurement?

What is a SCYE depth measurement?

The scye depth (armhole depth), the position of the waist, and the length of the jacket are measured from the centre back neckline and are chalk marked according to the measurements. Lines are drawn 90° to the grain line at the scye depth, the waist, and at the jacket length mark.

How do you measure bust depth?

To measure bust depth, use the same starting point on the shoulder as your front waist length, measuring down to the apex of your bust point.

What is the armscye measurement?

From Wikipedia, the free encyclopedia. In sewing, the armscye is the armhole, the fabric edge to which the sleeve is sewn. The length of the armscye is the total length of this edge; the width is the distance across the hole at the widest point.

What is a Womens bust?

It is a body measurement which measures the circumference of a woman’s torso at the level of the breasts. It is measured by keeping a measuring tape horizontal and wrapping it around the body so that it goes over the nipples and under the arms. The bustline is an important measure in women’s clothing sizes.

What is vertical body measurement?

Vertical proportions are the relation of your body parts to each other and as a whole. The length of your legs compared to your upper body, your waistline, your head size and neck length all factor into vertical proportion.

How is armscye depth calculated?

How to take your body armhole measurement

  1. Put a needle under your arm.
  2. Put the tape measure on your shoulder (where the sweater front would seam to the back)
  3. Drop the tape measure straight down.

What is the horizontal measurement?

In plane surveying, the distance between two points means the horizontal distance. If the points are at different elevations, then the distance is the horizontal length between plumb lines at the points.

What is body rise measurement?

Rise. The Rise measurement tells us whether something is high-rise, mid-rise, low-rise, etc. This measurement is taken by measuring from the top of where you want the pants to be, down through the crotch, and back up to the top of the pant in the back.

What’s the best way to measure scye depth?

Measure the scye depth from the vertebra (base of the neck) to the armhole depth. Place a cardboard strip (approx. 50 cm long) under the arm. Fold the cardboard strip horizontally to the centre back.

How is the Scye width of an arm measured?

Measure the scye width between the front and back armhole pitch line. The scye width determines the armhole width. The scye width can also be calculated. Measure horizontally from the centre front to the beginning of the arm. The chest width can also be calculated.

What is the purpose of a depth gauge?

A depth gauge typical refers to is a precision measurement instrument that is used by mechanical engineers, manufacturing engineers, and machinists among others, to accurately obtain the measurement of the depth of a bored cavity, recess, hole, groove or other similar openings that were created below the surface level of a material.

How are depth micrometers used to measure steel surfaces?

This paper presents results from a recent analysis of measurements taken by the three device types on steel blasted with an assortment of blast media and proposes a new method of depth micrometer measurement called average of the maximum peaks. Steel surfaces are frequently cleaned by abrasive impact prior to the application of protective coatings.