# What are the applications of socket and spigot joints?

## What are the applications of socket and spigot joints?

A cotter joint, also known as a socket and spigot joint, is a method of temporarily joining two coaxial rods. One rod is fitted with a spigot, which fits inside a socket on one end of the other rod. Slots in the socket and the spigot align so that a cotter can be inserted to lock the two rods together.

### What are the application of a cotter joint?

Application of Cotter Joint It is used to connect piston rods in a crosshead in a steam engine. It is used to connect the piston rod with its extension. It is also used in bicycles to connect pedals to sprocket wheels. Foundation Bolt.

What are the elements required for socket and spigot cotter joint?

Cotter Joint has mainly three components – spigot, socket and cotter as shown in Figure 9.1. Spigot is formed on one of the rods and socket is formed on the other. The socket and the spigot are provided with a narrow rectangular slot. The cotter is tightly fitted in this slot.

When the spigot collar in a socket and spigot cotter joint fails in shear the resisting area is given by?

Failure of the spigot collar in shearing. We know that area that resists shearing of the collar = π d2 t1 and shearing strength of the collar, = π d2 t1 τ Equating this to load (P) we have P = π d2 t1 τ From this equation, the thickness of spigot collar (t1) may be obtained. Figure 7: 8.

## What are the types of cotter joints?

There are three types of cotter joint for connecting two rods by one coater:

• Socket and spigot cotter joint.
• Sleeve and cotter joint.
• Gib and cotter joint.

### Which is not a part of cotter joint?

Which of the following is not a part of cotter joint? Explanation: There is no point of mentioning collar alone in a cotter joint. It has to be a spigot collar or socket collar. 5.

What is knuckle joint and its application?

A knuckle joint is a form of pin joint that’s used to transmit tension loads while allowing rotation in one plane. Knuckle joints are often used to connect rods subjected to tension in structures such as roof ties, bridges, and cranes. The links of a chain are also considered a series of knuckle joints.

Which one is not part of cotter joint?

## What are the types of cotter joint?

### Why cotter is tapered?

Cotter is fitted in the tapered slot and remains in its position because of wedge action. i) It is simple to remove the cotter and dismantle the joint parts. ii) Taper ensures tightness of the joint in operation and it prevents slackening of the parts. Generally the value of taper on cotter is 1 in 48 to 1 in 24.

Which of following is a part of knuckle joint?

Eye. Pin. Fork.

How is the socket and spigot Cotter joint designed?

A rectangular hole is made in the socket and spigot. A cotter is then driven tightly through a hole in order to make the temporary connection between the two rods. The load is usually acting axially, but it changes its direction and hence the cotter joint must be designed to carry both the tensile and compressive loads.

## Can you get a personal loan with a coapplicant?

They can also help you get approved for a lower interest rate and origination fee if your coapplicant has a higher credit score than you. And since lenders look at your combined income, you can often qualify for more money with a joint personal loan. But it’s not the same as a cosigned loan.

### Can you get a joint loan with a co-borrower?

Cosigned loans are, in some ways, simpler than joint loans with a co-borrower. For one thing, lenders are often reluctant to issue joint loans to borrowers who aren’t blood relatives or a married couple.

Can a co signer take out a joint loan?

Both co-signed and joint loans include an additional borrower. However, a co-borrower taking out a joint loan has different rights and responsibilities than a co-signer.

10/10/2019