How does the safety switch on a condensate pump work?
How does the safety switch on a condensate pump work?
A condensate safety switch is mounted on the side of your condensate drain pan or directly to your secondary drain port on the evaporator coil. There’s a float inside the switch that will rise if the water level of the pan fills up with a certain amount of water.
What are the 2 wires on a condensate pump?
Two sets of wires leave the pump. The high-voltage wires power the float switch and pump motor, and the low-voltage wires turn off the air handler if the pump fails.
What does a condensate safety switch do?
An HVAC wet switch/float switch, also known as a condensate overflow switch, serves to prevent this pan from overflowing if the AC drain stops working properly. The switch is activated when the level of the water in the pan comes above a certain point, causing the switch mechanism to trip/float to rise.
Can you hardwire a condensate pump?
ALARM WIRES ONLY! To install a ClearVueKübe Condensate Pump in applications where the supplied plug is not suitable, hard wiring may be necessary. When hard wiring a condensate pump, all electrical connections must be in compliance with local code requirements and the National Electric Code.
What is a safety float switch?
A safety float switch ensures that such a situation does not occur. Air conditioning is designed to ensure that excess moisture drains outside. Emergency drain pans and safety float switches, properly installed by a professional, can provide peace of mind.
How do I reset my condensate airflow switch?
With a shop vacuum suck the water out of the secondary pan to a level low enough to allow the switch to go down to its lowest position. Once the water level is low enough for the switch to reset, the system should come back on.
What is a condensation safety switch?
Condensation Safety Switch. This device is installed on the water lines on your system. If the water runs over or does not drain properly the switch will disable the system preventing it from creating more water that can do damage. This will prevent ceiling damage from potential water leaks in the attic.
What is a condensation overflow switch?
Condensate Overflow Switches. The SS/SP Series condensate overflow switch detects rising water in A/C condensate drain pans and shut off the system to prevent overflow and water damage. The condensate overflow switch is designed for installation on auxiliary drain pan outlets or inline on primary drains.
What is an air conditioning float switch or safety switch?
A safety float switch prevents the drain pan in the unit from overflowing when the AC unit quits working properly. The safety switch uses a built-in microscopic plug to deactivate the compressor unit. The compressor controls the condensation process in the air conditioner.
A float safety switch is a quick and inexpensive safety piece that detects a backed up or clogged drain and simply turns off the system before it overflows.
