Helpful tips

How do you use cetol natural teak?

How do you use cetol natural teak?

bristle brush, smoothly, in the direction of the grain. Keep a wet edge to prevent lap marks and thoroughly saturate end grains where possible. Apply 3 coats of Cetol® Marine Natural Teak. Always allow 24 hours drying time in between coats.

Do you sand between coats of cetol?

Always allow 24 hours drying time between coats. It is not recommended to sand in between coats of Cetol on exterior wood. This will lower the overall layer thickness, which is very important for effective product performance.

Do I need to sand between coats of Sikkens?

Sikkens Cetol Deck Slip Resistant GENERAL ADVICE: Do not sand between coats. Always apply coatings along the grain and never across.

How do you use sikkens cetol?

Application

  1. Apply 1 coat with a good quality, long haired, natural bristle brush in a full flowing coat, laying off in the direction of the grain, using the minimum number of brush strokes necessary.
  2. Leave to dry for 24 hours.
  3. Finish joinery with two coats of Sikkens Cetol Filter 7 Plus.

How many coats does cetol have?

3 coats
Apply 3 coats of Cetol® Marine. Always allow 24 hours drying time in between coats. Sanding between coats is not recommended as this will result in a reduction of dry film thickness. Recommended film thickness must be applied to ensure effective product performance.

Can you put varnish over cetol?

Cetol Marine can be applied anywhere that you would use varnish, but is particularly suitable for areas that endure hard use—grabrails, swim platforms and ladders, or the cockpit sole, where it produces a surprisingly durable and non-slip finish.

Is teak oil better than varnish?

Coo-Var Teak Oil is suitable for a wide range of garden furniture, including tables and chairs, making timber look natural and oiled, with a sheen finish that takes better to hardwoods than that of more traditional wood varnishes.

How long to apply cetol marine natural teak?

Apply liberally using a long-haired bristle brush, smoothly, in the direction of the grain. Keep a wet edge to prevent lap marks and thoroughly saturate end grains where possible. Apply 3 coats of Cetol® Marine Natural Teak. Always allow 24 hours drying time in between coats.

When to apply third coat of Sikkens cetol?

Apply third coat of Interlux Sikkens Cetol Marine Natural Teak Finish Always allow 24 hours drying time between coats. All coats should be applied within a 1-2 week period.

How to apply cetol marine natural deck paint?

Sand lightly with 220-320 (grade) grit paper. Remove sanding residue prior to the application of Cetol® Marine Natural Teak. If using as a deck paint, sprinkle Interlux Intergrip (non-skid compound) onto the wet surface of the second coat of Cetol® Marine Natural Teak. Allow to dry for 24 hours.

When to apply cetol 1 to bare wood?

Fill all joints, cracks and nail holes with a good quality polyurethane or acrylic caulk/filler. Cetol 1 is always used as the first coat in any bare wood application. All systems consist of three coats. All three coats must be applied within 30 days after preparation. Spraying is only recommended for Cetol 23 Plus