Guidelines

How do I use my LG DVD recorder?

How do I use my LG DVD recorder?

Turn both devices around, plug in their power cables and turn both devices on. Press the “Input” button on your television’s remote control or on your television’s front panel until “HDMI” or “HDMI 2,” or “AV” or “AV 2” or “Component” is displayed on its screen and you see the LG logo transmitting from the DVD player.

How do I program my LG DVD remote to my TV?

Direct Code Programming Instructions

1. Enter Setup Mode. Press and hold down the SETUP button on the remote until the red light on the remote turns on.
2. Press the device type button.
3. Enter the device code.
4. Tests the results.
5. Repeat this process for your other devices.

How do I record a DVD with a DVD recorder?

First step is to connect your DVR to your DVD recorder with an RCA cable. Align the same color plugs to jacks between your DVR output (“line out”) and DVD input (“line in”). You then want to take the second RCA cable to connect the DVD output to the TV input.

How do I connect my DVD player to my HDMI TV?

Step 1: Plug the HDMI cable into the Blu-ray or DVD player. Step 2: Plug the opposite end of the HDMI cable into the HDMI port on your TV. Step 3: That’s it! Make sure to select the correct input on your TV to connect with your player.

How do I get my DVD player to play on my TV?

How to Connect a DVD Player to a TV

1. Unplug your TV and DVD player.
2. Set the DVD player on a shelf near the TV.
3. Connect your DVD player with the included cables.
4. Whichever cable you use, plug one end into the DVD player, and the other into the corresponding port in the TV.

How do I sync my DVD remote to my TV?

Program a universal remote to DVD, TV or Blu Ray

1. Turn on the device.
2. On the remote control, press the corresponding device button – “TV”, “DVD” or “AUX.”
3. Press and hold the “RCU SETUP” button until the device key blinks twice.
4. Press “9” “9” “0” using the number pad on the remote.

How do I record TV shows on my DVD recorder?

How to Copy Movies From TV to DVD Discs

1. Connect a DVD recorder to your TV.
2. Load a blank, writable DVD into the DVD recorder.
3. Tune your TV to the movie that you want to record onto the DVD disc.
4. Push the “Record” button on the DVD recorder.

How do I record from my computer to a DVD recorder?

How to Record From the Computer to a DVD Recorder

1. Connect the USB plug on the cable to an open USB port on the computer.
2. Connect the RCA plugs on the other end of the cable to the Input jacks on the back of the DVD recorder.
3. Place a blank, recordable disc into the DVD recorder’s tray.

How do I connect my DVD recorder to my computer?

Why does my TV say no signal when I plug in my DVD player?

If your TV has the correct INPUT or Source, unplug the cable and plug it back, or try another cable or port. Sometimes cable can short-out. Test if your DVD player works on other TVs. It could be your DVD player breakdown that leads to No Signal on your HDTV.

What is the model of the LG video cassette recorder?

DVD RECORDER/ VIDEO CASSETTE RECORDER OWNER’S MANUAL MODEL: RC797T Copyright © 2007, LG Electronics U.S.A., Inc. Call us and we will guide you through your first recording, for free. 1-800-243-0000

How do I Disconnect my LG video recorder?

Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the unit, unplug the unit from the outlet. When installing the product, ensure that the plug is easily accessible.

What is the model number of a DVD recorder?

DVD RECORDER/ VIDEO CASSETTE RECORDER RC297H-M_NA1ULLB Before connecting, operating or adjusting this product, please read this owner’s manual carefully and completely. DVD RECORDER/ VIDEO CASSETTE RECORDER OWNER’S MANUAL MODEL: RC797T Copyright © 2007, LG Electronics U.S.A., Inc.

Can a DVD be recorded in VR mode?

DVD-RW: – DVD-RW discs can be formatted for VR mode recording or Video mode recording. – These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the same Disc. [VR mode] – Recordings can be extensively edited.