How do I reset my Epson printer after paper jam?
How do I reset my Epson printer after paper jam?
Paper Jam Problems
- Cancel the print job from your computer, if necessary.
- Gently pull out any jammed paper from the output tray and sheet feeder.
- Press the start button to resume printing.
- Press the power button to turn the product off.
- Lift up the scanner unit, and remove the jammed paper and any torn pieces.
Why does it say there is a paper jam when there is no paper jam?
If the paper is even slightly askew, the rollers will pick it up a little crooked, and — guess what — the crooked sheet will immediately get jammed. So even though there’s no paper stuck when you start printing, the loose paper guides are ensuring that a sheet gets jammed whenever the printer starts doing its thing.
How do you clear a paper jam status?
Solution one: Clear the paper jam
- Step one: Remove any loose paper. Remove any loose sheets of paper from the input tray and the output tray.
- Step two: Clear the paper jam from the rear of the product.
- Step three: Open the cartridge access door, and then clear the jam.
- Step four: Print a printer status report.
How do I fix the ADF error on my Epson printer?
If the Automatic Document Feeder is open, close it and then try again. If the Automatic Document Feeder is already open while you are scanning, remove any jammed paper; reload any document not yet scanned and then restart EPSON Scan.
Where is the reset button on an Epson printer?
To Factory Reset an Epson printer: Press and hold the reset button on the back of the printer (normally located to the right of the ethernet port).
How do I clear an Epson printer error?
Find the button marked Pause/Reset on the row of buttons on the control panel. Press and hold the button down for at least three seconds to clear the print job and reset your printer so you can start printing again. Try printing again. Repeat the process one time if you still experience printer errors.
How do you refresh a printer paper jam?
How to Fix a Paper Jam in a Printer
- Turn off and unplug the printer.
- Remove all printer paper from the tray and then reload it.
- Open the rear access door or duplexer (or any other doors that give you access to the paper’s path through the printer)
- Close the doors and plug in the printer.