How do I configure my firewall to allow FTP?
How do I configure my firewall to allow FTP?
To enable FTP traffic in Windows 7 and 8:
- In Windows Control Panel, open Windows Firewall.
- Click Advanced Settings.
- In the Windows Firewall with Advanced Security dialog, click Inbound Rules : New Rule.
- On the next screen, select the rule type ‘Port.
What ports should be open for FTP?
The FTP protocol typically uses port 21 as its main means of communication. An FTP server will listen for client connections on port 21. FTP clients will then connect to the FTP server on port 21 and initiate a conversation. This main connection is called the Control Connection or Command Connection.
What is active FTP mode?
FTP may operate in an active or a passive mode, which determines how a data connection is established. In the active mode, the client starts listening on a random port for incoming data connections from the server (the client sends the FTP command PORT to inform the server on which port it is listening).
Where to install FTP service in Windows Server 2003?
Click OK twice and then Next to install the FTP service. During installation you”ll need to insert your Windows Server 2003 product CD or browse to a network distribution point where the Windows Server 2003 setup files are located. Click Finish when the wizard is done.
How to enable the Windows Server 2003 Firewall?
Enable the firewall in windows server 2003. Right-click the connection that you want to enable Firewall and then click Properties on the shortcut menu that appears. 2. Click the Advanced tab, and then click to select the Protect my computer and network by limiting or preventing access to this computer from the Internet check box.
How to configure a FTP server on a firewall?
Use “0-0” to configure the FTP server to use the Windows TCP/IP ephemeral port range. In the External IP Address of Firewall box, type the IPv4 address of the Internet-facing network adapter of your firewall. In the Actions pane, click Apply.
How to disable stateful FTP filtering in Windows Firewall?
To disable stateful FTP filtering so that Windows Firewall will not block FTP traffic, type the following syntax then hit enter: It is often challenging to create firewall rules for FTP server to work correctly, and the root cause for this challenge lies in the FTP protocol architecture.