How do I change the battery in my pedometer pulse?
How do I change the battery in my pedometer pulse?
If you need to change the battery, simply remove the screw located at the top of the flexi-clip, open the casing carefully and replace the battery. If you see an error message , insert a fine point like a paper clip into the hole on the rear of your GCC Pulse to activate the factory reset.
How does a pedometer sensor work?
The technology for a pedometer includes a mechanical sensor and software to count steps. Early forms used a mechanical switch to detect steps together with a simple counter. If one shakes these devices, one hears a lead ball sliding back and forth, or a pendulum striking stops as it swings.
Why does my pedometer not work?
If your pedometer just took a tumble and now it’s not working, it probably is broken permanently. You can try removing the battery and replacing it in hopes this will revive it. The best prevention for this common accident is to use a pedometer safety leash.
How do I reset my Avia pedometer?
To reset pedometer usage data, press and hold MODE RESET button for 4 seconds.
How do you set a Sportline pedometer?
- Press the “Mode” button on the front of the display. Continue pressing until “Calorie” mode shows on the display.
- Hold the “Mode” button down for two seconds to enter “Weight” mode. Hit the “Up” and “Down” arrow keys to enter your weight.
- Set your proper weight and stop pressing the buttons.
Why is 10000 steps a day?
10,000 steps a day started as a marketing slogan Lieberman wrote in his recent book, “Exercised,” that the Manpo-kei (translated as 10,000-step meter) was invented in the 1960s by the Japanese company Yamasa Tokei — the producer of the first commercial pedometer — which chose the name because it sounded good.
How do I clear my pedometer app?
You can also reset all values on your pedometer by holding down the left and right buttons simultaneously for 3 seconds.
How do I reset my pedometer?
Push a thin, pointed object such as the end of an unbent paperclip into the “System Reset” recession on the back of the pedometer near the battery compartment. The clip will reach a button that tells the pedometer to perform a complete system reset of all stored data.